Christmas cards

Christmas cards,well it's that time of year.When my two grandsons were here in September I asked them to produce a couple of sketches each of Christmas scenes,the English boy James is 8 and the French one Owen is 10.I reduced them and did the usual transfer to copper plates and then printed off a batch of each,I did end up hand colouring each card to save time,but i am resonably happy with the results.These cards will be for family and friends.    

Spanish Break

 "The rain in Spain falls mainly on the plain".Well not today it dosen't,its falling on the Costa's.We are in Spain for an autumn holiday.One of my family has a holiday apartment in Calpe so we have driven down from Brittany to spend a few weeks escaping the worst of the weather further north.It hasn't worked today and rain and strong winds are predicted this week

. 

 This is what we expect to see in Spain at this time of the year,warm sunny weather and a chance to have a late swim.

  

This is the weekly market at Altea with the Sierra Bernia  in the background.An opportunity to buy that must have bag or pair of shoes,there are plenty to choose from here. 

 

How many different types of palm are there.I particularly like the bark on the trunks
I think I am going to

do some sketches with a view to doing a print when I get home.
                                                                  

Trial Print

Now that the family have returned to their homes after the summer holidays I can get back to my printing.This is the old lighthouse at Nantouar not far from my house.It's now a holiday home and sits empty for most of the year,shame, I love this building it has so much character.
This is my trial print,whoop's just noticed that the "R" is round the wrong way.I haven't tried removing errors from the copper plate so this will be good experience.
I have done a bit of hand colouring just to get a feel for final result.I think i am going to do a pink background which might suit.
The aquatint is achieved by using acrylic car spray,just a dusting from about 20inches away.To be continued!

Holidays

The family are here on holiday so not much is getting done .Both grandson's one French ,one English are ready for the fishing trip I promised them.Eager beavers. 



Ready to go



Preparing the dingy



I picked a nice calme day so it should have been good,its a shame that the fish didn't agree ,caught nothing! Never mind try another day.

Is'nt it about time I caught something?

A distraction

Curry night!what's this got to do with printing?Well it's my turn to cook tonight and it's curry.

While I wait for the chicken to cook I'm looking out of my kitchen window at the Swifts or could be house Martins feeding on insects it's been a warm day and the brood that's been nesting in the little barn across the lane are out in force feeding on the evening insects.

What fantastic little birds.I guess that they are feeding up before the long trek home to Africa.

I can feel a print coming on.

My first print



This week i have been trying out my press.I decided to etch my plates using ferric chloride as it can be posted in granular form and then be made up into a solution.I have no experience with this material so i thought i might make a test piece to get an idea of what the results would be for a set amount of time in the acid.After covering the plate with liquid ground I used an etching needle to inscribe a copper plate with 2,3,6,12,24 and 48 min marks,exposing the whole plate for 2min, washing off in water and after drying covering the 2min marks with stopping out varnish.It then went back in the acid for 1min to complete the second etch.I carried on masking and etching the plate in the same way halving the etch time until the last 48min mark was etched for a further 24min.I hope this makes sense.Anyway it seemed to work and I now have an idea how dark an etched line will be for a given amount of time in the solution.I know that other factors are involved the concentration of the mix and the temperature have an influence,but it will do to start.      







I call this first print "Elvers" it seemed an easy in for a first print but after my initial sketch, actually etching through the ground to give a smooth flowing line was very difficult because unlike a sketch you can't just rub out the line and re-draw it.I think my home made scribers were not helping so i am going to invest in a proper tool.

printing press part 3

The main assembly of the press is now complete so its time to strip everything down so i can spray the individual parts.This will now have to be left for a day to harden off before re-assembly.

The following day the first job is to locate the rollers in their respective bearings in one half of the press frame.The next is the attachment of the 12mm studding that i have used to connect together both halves of the press.To the top two sets of studding i have included small roller bearings to help support the main press bed and to give it a smooth operation.

The top half of the press is then lowered onto the rollers and studding,completing the main structure.

 All that remains is to make the press bed .I have decided to experiment with 18mmMDF and ply with a 2mm steel plate fitted under the bed . I can't wait to try out the press on an etching i have been working on ,but in my haste

to finish the press ,i have forgotten to order the blankets ,so i will have to wait a bit longer to do the first trial print.

I have been a bit restricted on the width of the press because the design has been based around the main rollers that were given to me but i think that it will at least enable me to start work and perhaps enlarge the press as i gain more experience.